The PVC fast roller shutter door is windproof and dustproof and widely used in food, textile, electronics, printing and packaging, automobile assembly, precision machinery, logistics and warehousing and other places. It is suitable for logistics and workshops. The solid door body can withstand larger loads. The built-in hidden steel pipe and fabric door curtain have a beautiful and strong appearance. The sealing brush can prevent wind and reduce noise.
In order to have longer service life for PVC fast roller shutter door, please pay attention to the following points during daily use.
①. Do not leave a rag soaked in neutral reagent or water on the surface of the roller shutter door for a long time, as this may easily discolor or peel off the surface finishing material. And do not rub the edges and corners of the roller shutter door too much, otherwise the paint on the edges and corners will peel off.
②. Do not hang heavy objects on PVC fast roller shutter door leaf, and avoid kicking and collision and scratches with sharp objects. In the case of large differences in temperature and humidity, slight cracking or shrinkage is a normal natural phenomenon. This phenomenon will naturally disappear with seasonal changes. After the roller shutter door is relatively stable and then repaired, there will be no major deformation.
③. When opening or closing PVC roller door leaf, do not use excessive force or too large opening angle to avoid damage. When carrying objects, do not collide with the door frame or door leaf. When maintaining the roller shutter door, be careful not to penetrate detergent or water into the gaps between the glass beading to avoid deformation of the beading.
If PVC fast roller shutter door button does not respond, should to solve the problem as below.
①. Confirm that the power supply is correct;
②. Confirm that the emergency stop button is not pressed;
③. Confirm that the power supply switch and the protection switch in the control box are closed;
④. Confirm that all electrical wiring is correct and the wiring is secure;
⑤. Confirm that the wiring of the motor and encoder are correct. If incorrect, please rewire according to the wiring diagram;
⑥. Confirm that all operating and control functions are wired correctly;
⑦. Check the system error codes and determine the problem based on the error code table.
Post time: Sep-05-2023