PVC roller shutter doors are especially needed for sterile workshops of enterprises with high requirements on production environment and air quality, such as food clean room, beverage clean room, electronic clean room, pharmaceutical clean room and other clean rooms. The curtain of roller shutter door is made of high-quality PVC curtain fabric; after processing, the surface has good self-cleaning properties, is not easy to be contaminated with dust, is easy to clean, has the advantages of wear resistance, high temperature resistance, low temperature resistance, etc., and can be used in laboratory clean room, food clean room, constant temperature room and other industry.
Things to note when using PVC roller shutter door
1. When using PVC roller shutter door, you need to pay attention to keeping the door as dry as possible. If there is a lot of moisture on the surface, it will not evaporate for a while and needs to be wiped clean with a soft dry cloth. In addition, it is necessary to keep the surface of the PVC roller shutter door motor clean and there are no dust, fibers and other obstacles at air inlet.
2. Try to avoid other objects near the door, especially some volatile gases or highly corrosive liquids, otherwise it may damage the surface of the door and cause the material surface to discolor and fall off.
3. When using, pay attention to the edges and corners of the PVC roller shutter door not to cause too much friction. Check whether there are objects around that will cause strong friction. If there are, please remove them as much as possible to prevent the door from being worn. The wear and tear of the edges and corners of the PVC roller shutter door will cause surface damage.
4. If the thermal protection device of the PVC roller shutter door is activated continuously, find out the cause of the fault and see if the equipment is overloaded or the set protection value is too low. Make appropriate adjustments according to the specific reasons. After the equipment fault is resolved, it can be restarted.
5. Clean the surface of the door frequently. You can use a soft and clean cotton cloth to wipe it. When encountering stubborn stains, try not to scratch it with hard objects, which can easily cause scratches on the door surface. These stubborn stains can be removed using detergent.
6. If the nuts, hinges, screws, etc. of the PVC roller shutter door are found to be loose, they must be tightened in time to prevent the door from falling, getting stuck, abnormal vibration and other problems.
Post time: Dec-22-2023