• page_banner

MODULAR CLEAN ROOM STRUCTURE SYSTEM INSTALLATION REQUIREMENT

The installation requirements for modular clean room structure system should be based on the purpose of most manufacturers' dust free clean room decoration, which is to provide employees with more comfortable environment and improve product quality and efficiency. However, the decoration of dust free clean room is much more complex than the requirements of ordinary factories. If you want clean room decoration to be more reasonable, you must first understand: What are the structural requirements for the decoration of the dust free clean room?

Modular Clean Room
Dust Free Clean Room
  1. 1. The decoration of dust free clean room can be seen as an independent space. Imagine being almost disconnected from the outside world, but not completely disconnected. Then, the external corridor becomes a buffer area in between dust free clean room and outside world, which can minimize pollution brought by the outside world.

2. The clean room doors and windows must use metal or covered with metal, and wooden doors and windows must not be used to avoid prolonged exposure in humid environments.

3. The windows on the outer wall should be flush with the inner wall, and it should be a fixed double-layer window to reduce energy loss.

4. It is necessary to fully consider the number of layers and the structure of theexterior window to seal air humidity and prevent contaminated particles from infiltrating from outside. Sometimes temperature difference between the interior and exterior is too large to cause condensation. To avoid this situation, it is necessary to seal the space between airtight door and interior window.

5. Door and window materials should be selected with good weather resistance, small natural deformation, small manufacturing error, good sealing, simple shape, not easy to remove dust, easy to clean, and no threshold for frame doors.

Summary: It is worth noting that after confirming the structural requirements for the decoration of the dust free clean room, it is necessary to analyze vehicle route, pipeline system, exhaust pipe, raw material handling, and dust free clean room operation when preparing for the decoration of the dust free clean room. Shorten the movement line, avoid crossing, and avoid cross contamination. A buffer area must be set up around the dust free clean room, which means that the passage of manufacturing equipment should not have a significant impact on the operation.

Clean Room Door
Clean Room Window

Post time: May-22-2023